Cutting / Sawing
Brand: TORK CRAFT
MPN: TCD25024
Tork Craft TCT Circular Saw Blade — 250 × 24T × 30/16 mm (General-Purpose Rip)
Size: 250 mm diameter × 24 teeth [Bore: 30/16 mm]
Designed for high-performance ripping tasks, this 250 mm diameter Tork Craft blade features 24 tungsten-carbide tipped teeth and a 30 mm arbor with included reducer ring to 16 mm for broader saw compatibility. Ideal for ripping boards, sheet goods and heavy timber with quick feed, efficient chip clearance and dependable accuracy.....
N$ 232.30
Ex VAT:N$ 202.00
Brand: TORK CRAFT
MPN: TCD25040-16
Tork Craft TCT Circular Saw Blade — 250 × 40T × 16 mm (General-Purpose Combination)
Size: 250 mm diameter × 40 teeth [Bore: 16 mm]
A dependable all-rounder. This 250 mm, 40-tooth Tork Craft TCT blade balances cutting speed with a clean finish, so you can rip framing stock in the morning and cross-cut sheet goods in the afternoon without swapping blades. Tungsten-carbide tips keep their edge and a stable plate tracks straight through softwoods, hardwoods, plywood and MDF.....
N$ 281.81
Ex VAT:N$ 245.05
Brand: TORK CRAFT
MPN: TCD25040-30
Tork Craft TCT Circular Saw Blade — 250 × 40T × 30/20/16 mm (General-Purpose Combination)
Size: 250 mm diameter × 40 teeth [Bore: 30/20/16 mm]
A reliable all-rounder for the workshop and jobsite. This 250 mm Tork Craft blade uses 40 tungsten-carbide tipped teeth and a stable plate to balance ripping speed with a smooth cross-cut finish. It tracks straight through framing timber, sheet goods and laminates, delivering tidy, predictable results.....
N$ 281.81
Ex VAT:N$ 245.05
Brand: TORK CRAFT
MPN: TCD25080
Tork Craft TCT Circular Saw Blade — 250 × 80T × 30/20 mm (General-Purpose Cross-Cut Smooth)
Size: 250 mm diameter × 80 teeth [Bore: 30/20 mm]
When finish quality is non-negotiable, this 250 mm Tork Craft blade with 80 tungsten-carbide tipped teeth delivers crisp, clean cross-cuts. The high tooth count and precision-balanced plate produce chip-reduced edges on hardwood, plywood, MDF and laminates with minimal sanding required.....
N$ 383.53
Ex VAT:N$ 333.50
Brand: TORK CRAFT
MPN: TCDB10115
Diamond blade
TYPE:
Sintered and continuous
DIAMETER: ø115mm
BORE: Ø22.23mm
MAX RPM: 13,300
USE: Brick, concrete, cement block, granite, fiber cement,
stone and other masonry
What is a diamond blade?
A diamond blade is composed of a circular steel core and the diamond
impregnated segments. The segments are seperated by slots in the core.
These
slots assist in cooling the blade during operation by allowing water (wet
cutting) or air (dry cutting) to flow between the segmen..
N$ 63.25
Ex VAT:N$ 55.00
Brand: TORK CRAFT
MPN: TCDB10300
Diamond blade
TYPE:
Hot press and segmented.
DIAMETER: ø300mm
BORE: Ø25.4mm
MAX RPM: 6,400
USE: Brick, concrete, cement block, granite, fiber cement,
stone and other masonry
What is a diamond blade?
A diamond blade is composed of a circular steel core and the diamond
impregnated segments. The segments are seperated by slots in the core.
These
slots assist in cooling the blade during operation by allowing water (wet
cutting) or air (dry cutting) to flow between the segment..
N$ 1,175.24
Ex VAT:N$ 1,021.95
Brand: TORK CRAFT
MPN: TCDB11018-2
Continious Rim Diamond blade 180mm
PROFESSIONAL
For cutting ceramic tiles and natural stone slabs
Professional Series Diamond Blade with Continuous Rim (non-segmented) for cutting
ceramic tiles and natural stone slabs. Standard 22.23mm bore size to fit all makes
of angle grinders.
The Continuous Rim blade is most commonly referred to as a wet cut blade. There
are advantages to using water when cutting material:
Water significantly cools down the blade, allowing for longer service..
N$ 248.63
Ex VAT:N$ 216.20
Brand: TORK CRAFT
MPN: TCDB1110180
Continuous Rim Diamond blade 180mm
PROFESSIONAL
For cutting ceramic tiles and natural stone slabs
Professional Series Diamond Blade with Continuous Rim (non-segmented) for cutting
ceramic tiles and natural stone slabs. 25.4mm bore size to specific machines
The Continuous Rim blade is most commonly referred to as a wet cut blade. There
are advantages to using water when cutting material:
Water significantly cools down the blade, allowing for longer service life
It flushes out any ..
N$ 248.63
Ex VAT:N$ 216.20
Brand: TORK CRAFT
MPN: TCDB1110200
Continious Rim Diamond blade 200mm
PROFESSIONAL
For cutting ceramic tiles and natural stone slabs
Professional Series Diamond Blade with Continuous Rim (non-segmented) for cutting
ceramic tiles and natural stone slabs. Standard 22.23mm bore size to fit all makes
of angle grinders.
The Continuous Rim blade is most commonly referred to as a wet cut blade. There
are advantages to using water when cutting material:
Water significantly cools down the blade, allowing for longer service..
N$ 273.53
Ex VAT:N$ 237.85
Brand: TORK CRAFT
MPN: TCDB1110230
Continious Rim Diamond blade 230mm
PROFESSIONAL
For cutting ceramic tiles and natural stone slabs
Professional Series Diamond Blade with Continuous Rim (non-segmented) for cutting
ceramic tiles and natural stone slabs. Standard 22.23mm bore size to fit all makes
of angle grinders.
The Continuous Rim blade is most commonly referred to as a wet cut blade. There
are advantages to using water when cutting material:
Water significantly cools down the blade, allowing for longer service..
N$ 265.94
Ex VAT:N$ 231.25
Brand: TORK CRAFT
MPN: TCDB1110230-2
Continious Rim Diamond blade 230mm
PROFESSIONAL
For cutting ceramic tiles and natural stone slabs
Professional Series Diamond Blade with Continuous Rim (non-segmented) for cutting
ceramic tiles and natural stone slabs. 25.4mm bore size.
The Continuous Rim blade is most commonly referred to as a wet cut blade. There
are advantages to using water when cutting material:
Water significantly cools down the blade, allowing for longer service life
It flushes out any debris to lessen fri..
N$ 273.53
Ex VAT:N$ 237.85
Brand: TORK CRAFT
MPN: TCDB1110230-3
Continious Thin Rim Diamond blade 230mm
PROFESSIONAL
For cutting ceramic tiles and natural stone slabs
Professional Series Diamond Blade with Continuous Rim (non-segmented) for cutting
ceramic tiles and natural stone slabs. Thin rim version. Standard 22.23mm bore size to fit all makes
of angle grinders.
The Continuous Rim blade is most commonly referred to as a wet cut blade. There
are advantages to using water when cutting material:
Water significantly cools down the blade, allo..
N$ 397.27
Ex VAT:N$ 345.45